QSC DSP-3' Manual descarregar pdf (Página 2)

QSC® is a registered trademark of QSC Audio Products, Inc., Costa Mesa, CA

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office

“Phoenix Contact” is the trademark of Phoenix Contact, Inc., Middletown, PA

“Riacon” is the trademark of RIA electronic, Inc., Eatontown, NJ

“On-Shore Technology” is the trademark of On-Shore Technology, Inc., Tempe, AZ

All other trademarks are the property of their respective owners

APPLICATION NOTES:

•Full feature set, Direct-mounting, No external power or special interconnect cables required.

The DSP-3 is fully compatible with the following QSC Audio Products power amplifiers:

CX series: DCA series: PL2 series: PL2A series:

CX302 DCA1222 PL218 All

CX302V DCA1622 PL224

CX502 DCA2422 PL230

CX602V DCA3022 PL236

CX702 DCA3422

CX902

CX1102

CX1202V

•Remote Mounting Required, DSP Remote Mount Cable required: Full feature-set, no external power required.

The DSP-3 will need to be remotely mounted (accessory remote mount available) and connected to the amplifier’s DataPort with a DSP

Remote Mount cable (like a VGA cable but pin #9 is provided) when used with the following amplifiers:

CX series: DCA series:

CX204V DCA1644

CX254 DCA1824

CX404

•Remote Mounting, DSP Remote Mount Cable and External Power required: Full feature-set.

Powerlight series:

PL1.0 PL2.0HV

PL1.0HV PL2.4MB

PL1.4 PL3.4

PL1.5X PL4.0

PL1.6HVX PL6.0*

* Powerlight 6.0 and 9.0 MUST have pin #9 removed from the DataPort Cable before use!

PL1.8 PL9.0*

•Reduced Feature-set, Remote Mounting and External Power required, No DataPort Connection possible:

MX series: USA series: PLX series: RMX series non-QSC Amplifiers:

All All All All All

1 2 3 4 5 6 7 ... 23 24

Sem comentários

QSC DSP-3' Manual Página 2